1/18 Midget, Red, RTR

MSRP: $224.99
$179.99
(You save $45.00 )
Write a Review
SKU:
1RC1000

1/18 Midget, Red, Ready-to-Run.

Package includes the following:

1.  1/18 Midget Oval Car, Red

2.  2.4Ghz Transmitter - See Important Information Below

3.  2n1 Receiver & ESC - Forward and Reverse with LiPo protection

4.  230mAh NiMh 4.8 Volt Rechargeable Battery

5.  Wall Charger - NOTE FOR AUSTRALIA CUSTOMERS YOU WILL NEED A PLUG ADAPTER

6.  8700Kv Brushless Motor

7.  Micro Steering Servo

8.  Instruction Manual

9.  Sticker Sheet Set (Main Graphics, Number Sheet 1 and Number Sheet 2)

10. Tool Set (Allen Wrench and Nut Driver)

 

 

Vehicle Specifications 

Overall Length: 7.15" (181mm)

Front Track Width: 4.04" (102.6mm)

Rear Track Width: 4.2" (106.5mm)

Wheelbase: 4.15" (105.4mm) 

Height: 2.89" (73.4mm) 

Weight with Battery Installed: 6.6oz (186g)

 

2.4Ghz - Important Information

This model is controlled by a 2.4Ghz radio signal that could be subject to interference from many sources outside your control such as wifi and bluetooth systems. This interference may result in the loss of control so ensure you as the operator of this model always keep some distance in all directions around your model as a safety margin to avoid personal and/or property damage to you and others in the area.  You may also experience binding issues and vehicle operation issues due to the high output of wifi routers in the area.  This interference could also reduce the number of cars that can be run at one time.

 

 

 

 

1 Review Hide Reviews Show Reviews

  • 5
    Awesome little RC midget

    Posted by Mark Schaffer on Dec 11th 2017

    I just received my order of the midgets and parts. The cars look to be built well, and a couple steps above a toy RC car. The cars look well thought out. As we start to run the cars we’ll find out how wel, they handle and how durable they are when the cars are involved in crashes. Don’t be mistaken the cars are very small, about the length of a iPhone. Which I like became with the small scale you can build a small race track and have fun. I plan on building a track using PVC for the walls because it can be built and taken apart pretty quick, so you can take the track with you on vacation or how about the parking lot of a regular race track while your tailgating. My hope is the come out bit a vintage style midget and I’d like to see a Northwestern dirt modified. I’m just an enthusiastic buyer of the cars, I’m not involved with the company. I am impressed with the cars. This comes from a guy that’s been involved with RC cars, Trucks and airplanes for 31 years yup I’m and older guy that’s still a kid. Good luck to 1RC company remember great customer service must me #1