1/18 Sprint Car, Clear, RTR

MSRP: $249.99
$199.99
(You save $50.00 )
Write a Review
SKU:
1RC1012

1/18 Sprint Car, Clear, Ready-to-Run.

 

NOTE- On this clear car, the top and front wing come un-assembled and not attached to the car so you can paint the parts before you install them. For painting the clear panels it is necessary to use a polycarbonate paint that you can find at any local hobby shop.

 

Package includes the following:

1.  1/18 Sprint Car Oval Car, Clear (body panels come un-painted, no stickers applied)

2.  2.4Ghz Transmitter - See Important Information Below

3.  2n1 Receiver & ESC - Forward and Reverse with LiPo protection

4.  230mAh NiMh 5 Cell 6.0 Volt Rechargeable Battery

5.  Wall Charger - For 5 Cell Battery ONLY

6.  8700Kv Brushless Motor

7.  Micro Steering Servo

8.  Full Ball Bearings

9.  Instruction Manual

10. Sticker Sheet Set (Main Graphics, Number Sheet 1 and Number Sheet 2)

11. Tool Set (Allen Wrench and Nut Driver)

 

 

Vehicle Specifications 

Overall Length: 8.0" (203mm)

Front Track Width: 4.3" (109.2mm)

Rear Track Width: 4.6" (117mm)

Wheelbase: 4.7" (119.4mm) 

Height: 5.6" (142mm) 

Weight with Battery Installed: 8.5oz (241g)

 

 

2.4Ghz - Important Information

This model is controlled by a 2.4Ghz radio signal that could be subject to interference from many sources outside your control such as wifi and bluetooth systems. This interference may result in the loss of control so ensure you as the operator of this model always keep some distance in all directions around your model as a safety margin to avoid personal and/or property damage to you and others in the area.  You may also experience binding issues and vehicle operation issues due to the high output of wifi routers in the area.  This interference could also reduce the number of cars that can be run at one time.